SBM SOLUTIONS

Description: As one of the important crushing machine equipment in mine industry, jaw crusher has the advantages of big crushing ratio, high yield, uniform particle size and other characteristics. Because jaw crusher has much more advantages, it is so favored by the vast number of investors. But in the use process, jaw crusher also can appear a series of problems. The blocking material is a big problem. What are the reasons? Is there some corresponding solutions? The following is the solutions.

The common reasons of blocking material are mainly that the ore materials with high water content enter into the crushing cavity in the working process. At that time, the material is crushed into some small pieces by jaw crusher. Because the material contains the moisture, and have a certain viscosity, the small piece material will be mutually adhered together. Then, they stuck in between two pieces of jaw crushing cavity, resulting in the phenomenon of clamping material.

Another reason is that the material contains the viscous dilute soil. After crushing the material, they make the material to be stuck in the crushing cavity, and have the occurrence of the phenomenon of blocking material. These are the two common reasons about the jaw crusher blocking material.

Since we know the reason, then we can find the solutions. In order to avoid the phenomenon of blocking material, before the material enters the crusher, we can first do the preparation work of screening and dewatering. Reduce material moisture content and viscosity. We can also be appropriate adjustments the discharge port, increasing the outlet size, so that the materials can be discharged smoothly.

In addition, before use, we should first define the machine parameters, especially for the requirements of material properties. According to the crusher requirements about materials, then we select the suitable material. If the material does not comply with the crusher production process requirements, such as the temperature is too high or too much moisture, we can first undertake some handling work accordingly, to make the material as far as possible to reach or approach the crusher's request. Then throw into the crushing chamber.