NAVIGATION MENU

Home -> Products -> Spiral Classifier

  • Name :Spiral Classifier
  • Description:

    Spiral classifier is one of the most common beneficiation equipment. The application of spiral classifier is very wide. It can separate the different grades products. It can separate the lighter metal mineral particles from the heavier particles. It can separate out the fine particles and liquid from the coarse particles, and can separate out the slurry and liquid from solid particles (desliming and dehydration).

  • Structure:

    Spiral classifier is mainly composed of the driving device, the spiral body, the groove body, the lifting mechanism, the lower seat and discharge valve. The machine base adopts channel steel, the body adopts welded steel plate. Screw shaft parts use the pig iron, and wear resistance.

  • Working Principle:

    Spiral classifier uses the principle of the proportion different of solid particles, so the precipitation speeds is also different in the liquid. Fine mineral particles float in the water and overflow; the coarse ore particles settle on the bottom of the channel. Material is discharged from the upper by spiral, so as to finish the grading work. It can put the coarse material into the mill inlet by using spiral rotary vane, to filter out the fine material and be discharged from the overflow pipe.

  • Use variable frequency control technology, and the operation is simpler.
  • It is not easy to damage, and the repair rate is very low.
  • Powder quality is easy to control, and the fineness adjustment is convenient, flexible, and reliable.
  • This machine has the characteristics of simple structure, reliable work, convenient operation, saving energy, and rugged construction.
  • The base is made up of channel steel, and the body is made up of welded steel plate. The machine is more wear-resisting.
Model Spiral Dia(mm) Rotary speed (r/min) Tank Length (mm ) Motor kw Dimenstion
Drive Adust LxWxH (mm)
HC-3 300 12-30 3000 1.1 ---- 3850 490 1140
HC-5 500 8-12.5 4500 1.1 ---- 5430 680 1480
HC-7 750 6-10 5500 3 ---- 6270 980 1820
HC-10 1000 5-8 6500 5.5 ---- 7590 1240 2380
LC-10 8400 7.5 9600 1240 2680
HC-12 1200 4-6 6500 7.5 2.2 8180 1570 3110
LC-12 8400 7.5 2.2 10370 1540 3920
2HC-12 6500 15 4.4 8230 2790 3110
2LC-12 8400 15 4.4 10370 2790 3920
HC-15 1500 4-6 8300 7.5 2.2 10410 1880 4080
LC-15 10500 7.5 2.2 12670 1820 4890
2HC-15 8300 15 4.4 10410 3390 4080
2LC-15 10500 15 4.4 12670 3370 4890
HC-20 2000 3.6-5.5 8400 11-15 3 10790 2530 4490
LC-20 12900 11-15 3 15610 2530 5340
2HC-20 8400 22-30 6 11000 4600 4490
2LC-20 12900 22-30 6 15760 4600 5640
HC-24 2400 3.67 9130 15 3 11650 2910 4970
LC-24 14130 18.5 4 16580 2930 7190
2HC-24 9130 30 6 12710 5430 5690
2LC-24 14130 37 8 17710 5430 8000
2HC-30 3000 3.2 12500 40 8 16020 6640 6350
2LC-30 14300 17091 8680

Spiral Classifiers are usually suitable for the following situations: --Separation of fine particles and liquid from coarse particles --Separation of light particles from heavy particles --Separation of the particles into a number of products graded according to size --Separation of liquid from solid particles .

Supply the most current design and technical expertise;Supply parts sales and training service far beyond the initial sale;Your profits with quality parts and expert service.

Working Principle:

1) This crusher uses motor as its power. Through the motor's wheels, the eccentric shaft is driven by the belt and the belt wheel to make the jawstock move by a regulated track.

2)The angle between the toggie plate and jawstock will become large as the up of the jawstock. This will push the moveable jaw plate towards the fixed jaw plate,which can realize the multi-crushing of the materials.

3)The angle between the toggie plate and jawstock will become small as the down of the jawstock. The moveable jaw plate will leave the jaw plate at the presure of the tension rod and spring ,meanwhile ,the final products will be discharged from the dischargeing opening.

Related Products:

Product

Request a quotation

Share